Large QVGA LCD with extended information content, dual language support including 2-byte character languages and menu-driven key interface. Up to 10 Remote InfoAlarm Command Centers per 4010ES control unit. Uses RUI communications; requires external 24 VDC system voltage.

Key features

• 320 x 240 dot matrix (QVGA) display, up to 854 characters
• Up to 10 remote command centers per 4010ES control unit
• Up to six softkeys per screen
• Up to two languages per system
• international models allow customised legends
• Site plan bitmap (281 x 192 px) with activity status icons
• Up to 50 custom point detail messages
• Bright white LED backlight, selectable operation
• Primary display choices: First and Most Recent, First 5 and Most Recent, First 8, Site Plan, General Alarm, Direct to List

Applications

• Remote annunciation and control for 4010ES fire alarm control units

Specifications

Display: 320 x 240 dot matrix, QVGA, transflective with rear backlight | Active display area: 4.53 in. W x 3.4 in. H (115 mm x 86 mm); 5.66 in. diagonal (144 mm) | Characters: Up to 854 (standard ASCII font) | Supply voltage: 19 to 33 VDC (24 VDC nominal), system supplied | Supervisory current: 186 mA @ 24 VDC | Alarm current: 214 mA @ 24 VDC (backlight and tone-alert on) | Communications: RUI (Remote Unit Interface), unshielded twisted pair 18 to 12 AWG (0.82 to 3.31 mm2) | Capacity per 4010ES: Up to 10 Remote InfoAlarm Command Centers; up to 20 internal and external card addresses | Class X wiring distance: Up to 2500 ft (762 m) | Class B T-Tap wiring: Up to 10,000 ft (3048 m) total; up to 2500 ft (762 m) to farthest device | Max capacitance / resistance: 0.58 uF (580 nF) between conductors; 35 ohm total line resistance | Operating temperature: 32 F to 120 F (0 C to 49 C) | Operating humidity: Up to 93% RH non-condensing @ 90 F (32 C) | Custom point detail messages: Up to 50, 120 characters each

Standards: UL 864 listed | UL | ULC | CSFM listed | FM approved