AAC Block Adhesive is a factory prepared blend of portland cement, graded aggregates and polymers, mixed with water to produce a high strength thixotropic mortar. It is used for laying aerated lightweight concrete, fly ash bricks, cement hollow blocks and cellular concrete blocks, or for smoothing over block work in layers up to 12 mm. It is for interior and exterior use as thin bed block mortar.

Key features

• Long working time
• No curing required after block work is done
• Improved adhesion between two blocks
• Fast & economical

Applications

• Thin bed block mortar for ALC and cellular concrete blocks, interior and exterior
• Concrete blocks, cement mortar blocks/bricks, concrete hollow blocks, aerated light weight blocks, cellular concrete blocks, fly ash bricks

Specifications

Coverage: Approx. 300 sq.ft. per 50 kg bag at 2 mm bed thickness (block size 600 x 200 x 100 mm; mixed with 25% water) | Maximum Layer Thickness: Up to 12 mm | Packaging: 20 kg & 50 kg* bags | Colour: Grey | ANSI Classification: A 118.1T | EN Classification: C1TE | ASTM: C 1660 | IS 15477:2019 Classification: Type 1 T | VOC: Practically Nil

Standards: ANSI A 118.1T | EN C1TE | ASTM C 1660 | IS 15477:2019 Type 1 T

Packing: 20 kg and 50 kg* bags (Grey)