Atom 2-in-1 is shown under 'Economy Range Products' on the back page of the Interior Shade Card 2026 with 4 Year* Protection. The card presents the interior colour palette and directions for use (clean, repair, sand, prime, putty, prime, two top coats); product specifications are given in the Nippon Paint Product Catalogue.

Key features

• 4 Year* Protection
• Multi-Purpose Emulsion: a formula built to perform indoors and withstand the outdoors, giving every wall lasting beauty
• interior smoothness with exterior toughness
• Superior washability
• Low VOC
• Low odour
• 2-in-1 emulsion for interior and exterior

Applications

• Interior walls
• Exterior walls

Specifications

Range Tier: Economy Range Products | shade_count: 105 palette shades; 199 unique shade codes including 77 colour-combination shades, 6 FM-series swatches (NP FM 5101 P - NP FM 5106 A) and 11 additional 'Color Inspirations' shades | shade_range: White Post (NP OW 2216 P) ... Stone Fence (NP N 2003 D) | Shade Families: Off Whites (15), Yellows & Oranges (15), Peaches & Reds (15), Pinks & Purples (15), Blues & Blue Greens (15), Greens & Yellow Greens (15), Neutrals & Greys (15); plus a Floor Guard Coating / Roof Shades / Special shades panel | Shade Card Pages: Palette and colour combinations on pages 5-8; colour inspirations on pages 3-4 | Recommended Paint System: Surface preparation: Cleaning, Repairing, Sanding. Step 1 Priming: apply 1 coat of Nippon Paint Dr. Bond/Multi-purpose Wall Sealer/Latex Exterior Primer and allow to dry for 4-6 hours. Step 2 Top Coat Application: apply 2 coats of Nippon Paint Exterior Emulsion in an interval of 4-6 hours. Note: for dark shades, 3 coats are recommended. | Protection Period: 4 Year* | Finish: Matt | Coverage - Interior (1 coat): 16.72-19.51 sq.mt./litre/coat | Coverage - Interior (2 coats): 9.29-10.22 sq.mt./litre/2 coats | Coverage - Exterior (1 coat): 8.36-9.29 sq.mt./litre/coat | Coverage - Exterior (2 coats): 4.18-4.65 sq.mt./litre/2 coats | Dilution: 50% by volume with clean, potable water for both interior as well as exterior application; 20-30% by volume with potable water for dark shades | Where to Use: Interior and Exterior surfaces | Recommended Paint System (exterior): Primer: Nippon Paint Multi Purpose Wall Sealer/Exterior Primer, apply 1 coat and allow to dry for 4-6 hours. Top Coat: Exterior Emulsion, apply 2-3 coats at an interval of 4-6 hours. For dark shades, 3 coats are recommended, applied with a roller for better hiding. Repainting: clean surface free from dust, grease and flaking paint; remove unstable paint by high pressure wash or scraper; remove algae/fungus by high pressure wash or coir brush and treat with Nippon Paint Walltron Kleanwall. New plaster: surface must be completely cured and dry; cement paint/white cement/lime undercoat not recommended. Post application: clean the exterior surface with clean water every six months.

Warranty: 4 Year* Protection (Terms and conditions apply; refer to nipponpaint.co.in technical data sheet and warranty documentation)