Everest CCB is a high performance, through-coloured fibre cement board that does not need an additional coat of paint. It offers elevated impact resistance and dimensional stability for all weather conditions and is also positioned for internal wall lining that must meet durability requirements. Panels are available in a range of shades with a hydrophobation surface treatment, and can be supplied with perforations, engravings or other surface treatments.

Key features

• Through-coloured
• no additional coat of paint required
• Elevated impact resistance and dimensional stability
• Weather resistant and termite proof
• Moisture resistant
• suitable for internal wall lining
• Surface treatment (Hydrophobation) with a wide range of finishes and colours
• Panels with perforations, engravings or other surface treatments available
• Pre-finished, lighter and easier to install than brick and mortar
• Eco-friendly material selection
• Expert support: technical advice, data sheets and certification, product selection, site visits, installation advice

Applications

• External facade
• Internal cladding
• Hospitality and conference facilities
• Retail and shopping malls
• Commercial building
• Education
• Healthcare and leisure
• Restaurants and hotels
• Public utilities

Specifications

Sizes (L x W): 2400 x 1200 mm; 2440 x 1220 mm; 3000 x 1200 mm; 3000 x 1220 mm | Thickness: 8, 10, 12 mm | Apparent Density: > 1450 kg/m3 (EN 12467) | Minimum Modulus of Rupture (at EMC): > 18 MPa (ASTM C 1185) | Minimum Modulus of Rupture (in Wet Condition): > 14 MPa (ASTM C 1185) | Adhesion Lamina Test: 0.8 MPa (ASTM D 1037) | Direct Screw Withdrawal Strength: 1750 N (ASTM D 1037) | Thermal Conductivity: 0.22 W/mK (ASTM C 518) | Linear Coefficient of Thermal Expansion: 9.4 x 10^-6 mm/mm/deg C (ASTM C 696) | pH Value: 8-9 | Moisture Content (at EMC): 6-8 % | Freeze-Thaw Resistance (50 Cycles): Pass (EN 12467) | Freeze-Thaw Resistance (100 Cycles): Pass (EN 12467, general properties table) | Warm Water Resistance: Pass (EN 12467) | Soak-Dry Resistance (50 Cycles): Pass (EN 12467) | Heat-Rain Resistance (25 Cycles): Pass (EN 12467) | Water Absorption - Raw Panel: < 30 % (EN 12467) | Water Impermeability: Pass (EN 12467) | Dimensional Tolerance - Length, Width and Thickness: Level 1 (EN 12467) | Dimensional Tolerance - Straightness of Edges: Level 2 (EN 12467) | Dimensional Tolerance - Squareness of Edges: Level 1 (EN 12467) | Shades Shown: Limestone Yellow, Mightnight Grey, Terracotta Red, Ash Grey (palette described as a variety of shades) | Surface Treatment: Hydrophobation

Standards: EN 12467:2012+A2:2018 | ASTM C 1185 | ASTM D 1037 | ASTM C 518 | ASTM C 696