FloArm Screed Eco improves screed homogeneity and reduces air pore content, shrinkage (curling) and crack formation, with enhanced workability, good water retention and high early strength. It is compatible with OPC 43 or 53 grade cements (IS 8112) and suitable for indoor and outdoor use and permanently wet areas. A bonded screed of 25-100 mm in a single layer is used only in combination with FloArm Primer BA bonding slurry.

Key features

• Strength up to CT-C35-F5
• Hard enough to walk on after 1 day, able to bear loads after 3 days
• Improvement of surface properties
• No moisture curing required
• Bonded screed: no groove cutting
• unbonded bay size 40 sqm
• Compatible with OPC 43 or 53 grade cements (IS 8112)
• Suitable for all DIN compliant surface heating systems

Applications

• Indoor and outdoor screeds
• Permanently wet areas
• Bonded screed 25-100 mm (with FloArm Primer BA)
• Unbonded screed 35-100 mm

Specifications

Type: Screed stabiliser additive | Strength Class: up to CT-C35-F5 | Walkable After: 1 day | Load Bearing After: 3 days | Minimum Thickness: Bonded screed 25 mm / unbonded screed 35 mm | Bonded Screed Single Layer Thickness: 25 - 100 mm (only with FloArm Primer BA bonding slurry) | Unbonded Screed Single Layer Thickness: 35 - 100 mm (50 mm onwards recommended for industrial / heavy duty use) | Unbonded Bay Size: 40 sqm | Cement Compatibility: OPC 43 or 53 grade, IS 8112

Standards: IS 8112 (compatible cement)

Packing: 5 Ltrs