FloArm Screed Ultra is used for fast drying time with early strength and improves screed homogeneity with reduced air pore content, shrinkage (curling) and crack formation, enhanced workability and good water retention. It is used in bonded, unbonded, floating and heated screeds, heavy duty floors and industrial screed, indoors and outdoors and in permanently wet areas. Dosage: 2 ltr per m³ with minimum 312.5 kg and maximum 375 kg OPC 43/53 cement. For challenging applications MYK Arment offers AquaArm Screed SS.

Key features

• Guaranteed drying time approx. 48 hours for tile and 72 hours for all other floor coverings
• Approximately 80-90% of final strength within the first 3-4 days
• Unbonded bay size 40 sqm
• Minimum thickness: bonded screed 15 mm / unbonded screed 35 mm

Applications

• Bonded, unbonded or floating screeds
• Heated screeds
• Heavy duty floors, industrial screed
• Indoors, outdoors and permanently wet areas

Specifications

Type: Screed additive | Dosage: 2 ltr per m³ with min. 312.5 kg and max. 375 kg cement (OPC 43/53 only) | Drying Time: approx. 48 hours for tile; 72 hours for other floor coverings | Early Strength: approx. 80-90% of final strength within first 3-4 days | Minimum Thickness: Bonded screed 15 mm / unbonded screed 35 mm | Unbonded Bay Size: 40 sqm | Sand: 0-8 mm per sieve analysis recommendation

Standards: EN 13139 | DIN 10452

Packing: 5 Ltrs