FLR13Y cables are TPE-E insulated low tension automotive cables used in motor vehicles for lighting, signal and instrument panel circuits operating across a wide range of extreme temperature. They have a bare soft annealed electrolytic copper conductor (Cu-ETP1, DIN EN 13602) built to ISO 6722-1 class D, with tinned copper available on request. The polyester based elastomer insulation gives consistent performance across -40°C to +150°C and is tear and abrasion resistant with good chemical and weather resistance and high impact strength.

Key features

• TPE-E (thermoplastic elastomer) insulation, ISO 6722-1 class D
• Temperature range -40°C to +150°C (3000 hrs)
• Tear and abrasion resistant
• high peak temperature resistance
• Good resistance to chemical and weather conditions
• high impact strength
• Type A and Type B conductor constructions
• tinned copper available on request
• Available in 100 m
• longer lengths in spools

Applications

• Lighting circuits in motor vehicles
• Signal circuits in motor vehicles
• Instrument panel circuits in motor vehicles

Specifications

Standard: In accordance to ISO 6722-1 class D | Temperature Range (3000 Hrs): -40°C to +150°C | Conductor: Soft annealed electrolytic copper Cu-ETP1 according to DIN EN 13602, bare conductor construction acc. to ISO 6722-1; tinned copper available on request | Insulation: TPE-E (Thermoplastic Elastomer) | Special Properties: Polyester based elastomeric cables offering consistent performance across the entire operating temperature range. Tear and abrasion resistant. High peak temperature resistance. Good resistant to chemical and weather conditions. High impact strength | Types: FLR13Y - Type A (0.22 to 2.5 sq mm); FLR13Y - Type B (0.35 to 6 sq mm) | Packing: Available in 100 mtrs.; longer length available in spools | Compliance Marks: REACH, RoHS, CE

Standards: ISO 6722-1 | DIN EN 13602 | REACH | RoHS | CE

Packing: 100 m; longer lengths on spools