Elite 100 is a one coat gypsum plaster with lightweight aggregates, a replacement for traditional sand cement plaster, suitable for most internal surfaces including brick, block and concrete. It consists of gypsum hemihydrate with special additives to increase workability and control setting. The lightweight aggregate Perlite improves coverage and workability and gives a smooth finished surface. Available in 25 kg PP bags.

Key features

• Coverage up to 100 m2/MT
• No water curing
• Higher setting time
• Low thermal conductivity
• 50% lighter than conventional plaster
• Saves water
• 2X faster construction
• Low wastage
• Energy saver
• Suitable for hand or machine application
• Coverage 100 m2/MT
• Energy saving

Applications

• Internal plastering on bricks
• Internal plastering on blocks
• Internal plastering on concrete
• Internal plastering on bricks, blocks and concrete

Specifications

Dry Bulk Density: Up to 770 kg/m3 | Wet Bulk Density: 1.35-1.5 g/cm3 | Water to Powder Ratio: 1:1.25 | Setting Time: 20-25 minutes | Coverage: Up to 100 m2/MT (at 13 mm thickness, lab conditions, 25 kg bags) | Lightweight Aggregate: Perlite | Base: Gypsum hemihydrate | Water To Powder Ratio: 1 : 1.25 | Packaging: PP Bag | Background: Bricks, blocks, concrete

Standards: GRIHA | GreenPro

Packing: PP Bag: 25 kg