GypSerra C Stud is the vertical supporting wall framing of the GypSerra partition system, listed in 48, 70, 92 and 146 mm widths with 34 x 36 mm flanges and lengths of 3050 or 3660 mm. Serration improves flatness on walls and reduces the risk of cracks developing in joints.

Key features

• Al-Zn 150 gsm coating
• Serrated GypSerra profile
• Serrated C-stud shows 8% less deflection under self weight (0.035 mm vs 0.038 mm) and 30% higher twist resistance (2.45 mm vs 3.61 mm) than knurled C-stud
• Significant wall flatness and reduced risk of cracks developing in joints
• Screws do not slip, so plasterboards are not damaged during installation
• Serrated (GypSerra) profile: 8% more surface area than plain sheet and effective surface thickness doubled (2T)
• Stronger surface due to work hardening
• load carrying capacity 10% higher than knurled sections
• Al-Zn coating of 150 gsm (corrosion resistance up to 5 times that of Zn 120 gsm)
• Gyproc logo embossed on every section
• centre of the section is easy to identify for screwing plasterboards
• Longitudinal ribs give stiffness and help alignment
• sections are easy to cut on site
• Serrated sheet shows 27% improved sheet capacity (1.207 vs 1.663 deflection) compared with knurled sheet

Applications

• Vertical support in wall framing
• Vertical support in drywall partition wall framing

Specifications

Coating: Al-Zn 150 gsm | Corrosion Resistance: Up to 5 times that of Zn 120 gsm | Metal Thickness: Available from 0.5 mm onward | Framing Technology: GypSerra serrated profile (patent-applied) | Surface Treatment: Serrated (GypSerra process) | Length Options: 3050 mm / 3660 mm | Metal Thickness (per page footnote): 0.5 mm (48 mm stud); 0.7 mm (70/92/146 mm studs); 0.9 mm (92/146 mm studs)