GypSerra I Stud is used for shaftwall applications, listed in 48, 70, 92 and 146 mm widths with a 38 mm flange and lengths of 3050 or 3660 mm. Retaining channel and starter channel of suitable sizes are also available for fixing the I stud.

Key features

• For shaftwall
• Retaining and starter channels available
• Retaining channel and starter channel of suitable sizes available for I stud fixing
• Serrated (GypSerra) profile: 8% more surface area than plain sheet and effective surface thickness doubled (2T)
• Stronger surface due to work hardening
• load carrying capacity 10% higher than knurled sections
• Al-Zn coating of 150 gsm (corrosion resistance up to 5 times that of Zn 120 gsm)
• Gyproc logo embossed on every section
• centre of the section is easy to identify for screwing plasterboards
• Longitudinal ribs give stiffness and help alignment
• sections are easy to cut on site
• Serrated sheet shows 27% improved sheet capacity (1.207 vs 1.663 deflection) compared with knurled sheet

Applications

• Shaftwall framing
• Shaftwall

Specifications

Coating: Al-Zn 150 gsm | Corrosion Resistance: Up to 5 times that of Zn 120 gsm | Metal Thickness: 0.5 mm (48 mm stud), 0.7 mm (70/92/146 mm studs), 0.9 mm (92/146 mm studs) | Framing Technology: GypSerra serrated profile (patent-applied) | Surface Treatment: Serrated (GypSerra process) | Length Options: 3050 mm / 3660 mm | Metal Thickness (per page footnote): 0.5 mm (48 mm stud); 0.7 mm (70/92/146 mm studs); 0.9 mm (92/146 mm studs)