Havells 0.6/1 kV single core XLPE insulated armoured cable (type N2XRaY/NA2XRaY) with annealed copper or aluminium conductor, round aluminium wire armoured and PVC sheathed, as per IEC-60502-1. Core identification is natural, and the cable is supplied on wooden drums. Tables 3 and 4 give dimensions, weights, standard drum lengths, packing dimensions, electrical characteristics and current ratings per conductor size for both copper and aluminium conductors.

Key features

• Higher current rating and emergency overload rating
• Superior short circuit rating
• Low dielectric loss
• Much better insulation resistance
• Resistant to chemical & corrosive gases
• Better resistance to surge currents
• Much longer life of the cables
• Type of cable N2XRaY/NA2XRaY (Cu / Al conductor)
• Construction: Conductor - Annealed Copper/Aluminium
• Insulation - XLPE
• Armouring - Round Aluminium Wire
• Outer Sheath - Extruded PVC
• Core identification: Natural
• Supplied on wooden drums
• Other specification and colour are available on request

Applications

• Indoor and outdoor installation
• Direct burial, preferably used where considerable mechanical stress must be envisaged

Specifications

Rated Voltage: 0.6/1 kV | Number of Cores: 1 | Conductor: Annealed Copper/Aluminium | Insulation: XLPE | Armour: Round Aluminium Wire | Outer Sheath: Extruded PVC | Conductor Size Range: 6 to 1000 mm2 | Type of Cable (Cu/Al): N2XRaY/NA2XRaY | Specification: IEC-60502-1 | Identification of Core: Natural | Type of Packing: Wooden Drum

Standards: IEC-60502-1 | BS 5467

Packing: Wooden drum; standard drum length 1000 / 500 m depending on conductor size (see variants)