Key features

• Pre-batched components, slurry/brushable consistency
• Self priming on bare concrete/plaster (dilute with water)
• Resists positive and negative hydrostatic pressure
• Excellent adhesion to concrete, natural/artificial stone and WB paint
• Semi-rigid coating also acts as damp proofing
• High coverage: about 12 sq ft/kg in 2 coats
• Crystalline action
• Anti-carbonation and anti-efflorescence
• Smooth off-white finish

Applications

• Exterior waterproofing of old or new concrete/masonry wall
• Damp proofing of interior walls
• Lightweight waterproof bottom coat for interior tiles, granite, marble and natural stones

Specifications

Part A: White liquid | Part B: White powder | Mixed density @25 degC: Around 1.74 g/cc | Positive hydrostatic pressure (DIN 1048): Passes 5 bar | Negative hydrostatic pressure (DIN 1048): Passes 4 bar | Adhesion strength on concrete slab: 0.8 MPa | Crack bridging (ASTM D 4548): Up to 1.2 mm | Surface dry time: 45 minutes - 1 hour | Cure time after 2nd coat: 4 - 6 days | Primer mix (Liquid:Powder:Water): 1 : 2 : 1 by weight, approx 25 ft2/kg | Waterproof coat (Liquid:Powder): 1 : 2 by weight, approx 20 ft2/kg/coat | Shelf life: 18 months, unopened, dry, 5 - 30 degC

Standards: DIN 1048 | ASTM D 4548

Packing: 3 kg and 15 kg packs