Jain uPVC pressure pipes are made from high quality uPVC compound in nominal outside diameters from 20 mm (1/2") to 630 mm (24") and are commonly supplied with plain ends or socketed at one end for solvent cement weld joint. The brochure lists the pipe range as pressure pipes with SW / TH / RR joints (solvent weld / threaded / rubber ring) from 20 to 630 mm. Minimum wall thickness is tabulated for each nominal diameter against IS 4985 pressure ratings (2.5 to 12.5 kgf/cm2) and ISO 1452-2 PN classes (PN 6 to PN 25). Physical and mechanical characteristics are guaranteed as per IS 4985:2000.

Key features

• Smooth inner wall minimizes frictional losses and scaling due to precipitation
• Available in sizes from 20 mm (1/2") to 630 mm (24") as per the standards
• Plain ends, or socketed at one end for solvent cement weld joint
• Close dimensional tolerances
• Available in various pressure ratings and standards (2.5 to 16 kg/cm2)
• Manufactured from high quality uPVC compound
• Excellent corrosion and chemical resistance to most acidic and alkaline solutions
• Light weight, easy to handle and transport
• Excellent flow characteristics

Applications

• Potable water supply system
• Lift & gravity irrigation system
• Drip / sprinkler irrigation system
• Rain water harvesting
• Industrial process lines
• Chemical conveyance system
• Cooling tower & hydro power station
• Tube-well construction
• Soil, waste & rain water system
• Agriculture irrigation distribution system
• Effluent treatment & conveyance pipeline system
• Centrifugal pump suction & delivery pipes

Specifications

Material: uPVC compound | Nominal Size Range: 20 to 630 mm (1/2" to 24") | Joint Types: SW (solvent weld), TH (threaded), RR (rubber ring) | Pressure Rating Range: 2.5 to 16 kg/cm2 (IS 4985 classes 2.5 to 12.5 kgf/cm2; ISO 1452-2 PN 6 to PN 25) | Pipe Colour: Light Gray or as per customer requirement | Dimensions: As per Table 1, 2, 3, 4 & 5 of IS 4985 : 2000 | Opacity: Max. 0.2 % | Reversion Test: Max. +/- 5 % | Vicat Softening Temperature: Min 80 °C | Density: 1.40 to 1.46 g/cc | Sulphated Ash Content: Max 11 % | Resistance to External Blows (TIR): Max. 10 % | Hydrostatic Characteristics: As per Clause No. 11 of IS 4985 : 2000 | Effect on Water: As per Clause No. 10.3 of IS 4985 : 2000 | Design Coefficient (C): 2.5 for 20 mm to 90 mm nominal diameter pipes; 2.0 for 110 mm to 630 mm diameter pipes | Wall Thickness Data: Minimum wall thickness in mm per nominal outside diameter and pressure class (IS 4985 and ISO 1452-2 tables, p.6)

Standards: IS 4985:2000 | ISO 1452 | ISO 1452-2 | DIN 8061 | DIN 8062 | IS 12231 | IS 9537 | IS 14787 | AS/NZS 1477 | SI 532 | PNS 65 | ASTM D1785 | ASTM D2241