Jain Sand Separator uses a patented hydrodynamic design and innovative water inlet to create centrifugal action that separates particles heavier than water, with a diffuser plate that settles dirt into the collection chamber. It has no moving parts, operates continuously and needs only 0.3-0.8 kg/cm2 pressure loss. It is coated with up to 150 micron deep blue polyester powder outside and epoxy inside, and is available with threaded, flanged (universal) or Easy Fix connections, and with a fully automatic option on demand.

Key features

• Patented hydrodynamic design creating maximum centrifugal action
• No moving parts to wear out
• 90% trapping efficiency for particle size above 75 micron and specific gravity more than 2.5
• No downtime - operates continuously without routine shutdowns for cleaning
• Low pressure loss: 0.3 - 0.8 kg/cm2
• Diffuser plate to settle dirt particles into the chamber
• Pure polyester/epoxy coating up to 150 micron thick, deep blue
• Threaded, flanged (universal) or Easy Fix connection options
• 20 mm '8' shape end stop with tube to drain silt/sand from collection chamber
• Reduces load and cleaning frequency of media/screen filters when installed before them
• Fully automatic option available on demand
• Available in single, duplex and triplex configurations

Applications

• Micro irrigation systems to remove sand and silt particles from irrigation water
• Installation ahead of media/screen filters

Specifications

Trapping Efficiency: 90% for particle size above 75 micron and specific gravity more than 2.5 | Pressure Loss: 0.3 - 0.8 kg/cm2 | Max. Pressure: 10 kg/cm2 | Coating: Polyester powder outside (up to 150 micron, deep blue) and epoxy inside | Construction: Mild steel | Connection Options: Threaded, Flanged (universal), Easy Fix | Drain: 20 mm '8' shape end stop with tube | Ordering Code Format: JSS + flow code (16, 30, 40, 60, 80, 120, 180) + units suffix (blank = single, D = duplex, T = triplex)