About this product
Key features
- Seismic resistant and corrosion resistant TMT rebar
- Produced in-house in Jindal Steel primary integrated steel plant at Angul and Patratu
- Made from BIS certified billets
- Longer life due to corrosion resistance (special alloying with copper, chromium, phosphorus)
- High yield strength coupled with ductility and bendability
- Better bond strength with concrete
- Stringent quality control through NABL accredited in-house laboratories
Applications
- Coastal regions with acidic environments
- Marine structures
- Coastal breezes
- Roads, bridges, flyovers
- Underground tunnels, metros
- Oil and gas exploration sites
- Thermal, hydel, nuclear power plants
- Naval base
- Industrial pollution areas
- Sea ports and jetty
- Shipyards
- Sea links and dam construction
- Hazardous area construction
Specifications
Grade: Fe550D CRS (IS 1786:2008) | Yield strength min (Jindal typical): 570 MPa | Ultimate tensile strength min (Jindal typical): 630 MPa | UTS/YS min: 1.1 (Jindal typical; seismic compliance UTS/YS 1.15 min on request) | % Elongation (Jindal typical range): 18-23 % | % Total elongation min (Jindal): 7 % | Carbon max (Jindal): 0.20 % | Sulphur max (Jindal): 0.02 % | Phosphorus max (Jindal): 0.012 % | S+P max (Jindal): 0.030 % | Nitrogen max: 0.012 % | Carbon equivalent (Jindal): 0.50 | Corrosion resistant alloying elements Cr+Cu+Ni+Mo+P (min): 0.40 % | Bend test mandrel, nominal dia up to 20 mm: 3Φ | Bend test mandrel, nominal dia above 20 mm: 4Φ | Rebend mandrel, nominal dia up to 10 mm: 5Φ | Rebend mandrel, nominal dia above 10 mm to 20 mm: 6Φ | Length: 12 m
Standards: IS 1786:2008 | GreenPro certified | Environmental Product Declaration (EPD)
