ONDULINE TILE is a corrugated bitumen roofing sheet with a unique tile-look design that remains easy to install, combining the convenience of long sheets with the beauty of small tiles. It is reinforced with cellulosic fibres and thermosetting resin and coloured with inorganic pigments.

Key features

• Tile-look design on long sheets
• Reinforced with cellulosic fibres and thermosetting resin
• Coloured with inorganic pigments
• Easy to install

Applications

• New structures
• Renovation (on wood or metal structures)
• Over-roofing over shingles, fibre cement sheets or used metal sheets

Specifications

Length: 2000 mm | Width: 970 mm | Gross Surface: 1.94 m2 | Thickness: 3 mm | Height of Corrugation: 38 mm | Weight per m2: 3.2 kg/m2 | Weight per Sheet: 6.2 kg | Composition: Corrugated bitumen sheet reinforced with cellulosic fibres and thermosetting resin; inorganic pigments | Installation - Roof Pitch: 15 degrees and above | Installation - Purlin Distance: 45 cm | Installation - Overhang at Eaves: 7 cm | Installation - Minimum End Overlap: 20 cm | Installation - Minimum Side Overlap: 1 corrugation | Wind Resistance: 225 km/h on metal structures; up to 260 km/h on wooden purlins (BBRI tests on ONDULINE CLASSIC: 3000 Pa metal purlin, 4000 Pa wood purlin)

Standards: BBRI (Belgium Building Research Institute) wind tests DE 651XM223 CAR 15070/1 (29) and CAR 15070/2 (29)

Packing: Up to 420 sheets per pallet