AGL Signature Marble & Quartz slabs are engineered quartz surfaces for interior applications such as counter tops, furniture, wall and floor cladding. The slab is supplied in a 3100x1400 mm size, 20 mm thick, with a polished surface. Recommended for interior use only; avoid direct sunlight exposure.

Key features

• Resistance to abrasion, shock and flexural strength
• Uniformity in colour, suitable for large applications
• Frost resistant
• High durability and lifespan
• Low porosity and low water absorption
• Re-polishable
• Ready to install
• Wide range available with customisation opportunity
• Edge profiles offered include Eased Edge, 1/2" Round, Half Bullnose, Demi Bullnose, Full Bullnose, 1/4" Bevel, Bevel Top & Bottom, 1/2" Bevel Top & Bottom, Laminated, 6 cm Bullnose, 6 cm Mitre Edge

Applications

• Kitchen counter top
• Bathroom basin top
• Furniture
• Shelf
• Floor & wall
• Staircase
• Window & door frame
• Dining table top
• Lift frame

Specifications

Material: Engineered quartz stone (siliceous base) | Size: 3100x1400 mm | Thickness: 20 mm | Surface: Polish | Water Absorption (EN 14617-1): <0.1 % | Compressive Strength (EN 14617-15): 170-250 MPa | Flexural Strength (EN 14617-2): 27-60 MPa | Surface Hardness (Moh's scale): 6-7 | Abrasion Resistance (EN 14617-4): 17-25 mm

Standards: EN 14617-1 | EN 14617-2 | EN 14617-4 | EN 14617-15

Packing: Slab 3100x1400 mm x 20 mm; wooden palleting; customised sizes on bulk requirement