PrismPlast-GS delivers a seamless one-coat render with a smooth, decorative finish in a single application. It is suited to internal and external surfaces with minimal wall preparation and is made from high-quality OPC-53 and polymeric additives. A minimum plaster thickness of 6 mm is recommended and a single layer should not exceed 18 mm; a curing period of 4-6 days is advised.

Key features

• Smooth finish
• Eco-friendly
• Easy to use
• Assured quality
• One-coat render
• Made from OPC-53 and polymeric additives

Applications

• Internal plastering
• External plastering

Specifications

Bulk Density: 1.6-1.8 Kg/L | Water Demand: 14-17% (+/-3%) | Pot Life: Up to 1 hr @ 27°C | Compressive Strength (28 days): ≥ 9 MPa | Pull Off Test (28 days): >= 0.30 MPa | Recommended Minimum Plaster Thickness: 6 mm | Maximum Single-Layer Thickness: 18 mm | Recommended Curing Period: 4-6 days | Packaging: 40 kg PP laminated bag | Shelf Life: Best before three months from the date of manufacturing if stored in clean and dry place with sealed ends

Packing: 40 kg PP laminated bag