APL Apollo Tubes Limited offers scaffold tubes as per EN 39 for supporting men and material, tools and tackles during construction, alteration, demolition and maintenance work. Tubes have square-cut ends, straightness of 1 mm in 600 mm and are marked 'EN 39 APLAPOLLO TUBES -3.2/4.0'. They are delivered either as rolled (without protection) or hot dip galvanised.

Key features

• Square cut end finish
• straightness 1 mm in 600 mm
• Flattening test in two stages: flatten up to 75% of tube diameter for weld and up to 60% of tube diameter for material
• bend test also available
• Zinc coating 45 microns minimum (outside)
• Marking: EN 39 APLAPOLLO TUBES -3.2/4.0

Applications

• Supporting men and material, tools and tackles during construction
• Alteration, demolition and maintenance work

Specifications

End Finish: Square Cut | Straightness: 1 mm in 600 mm | Flattening Test: Two stages - flatten up to 75% of tube dia for weld; flatten up to 60% of tube dia for material | Bend Test: Also available | Zinc Coating: 45 microns minimum (outside) | Marking: EN 39 APLAPOLLO TUBES -3.2/4.0

Standards: EN 39 | BS EN 39:2001