For connecting between the frequency converter and the motor for power circuits in machine cabling, in dry, damp or wet interiors under normal mechanical stress; outdoor use is possible within the permitted temperature range. Control pairs are screened with laminated film and tinned-copper braid, and cores and pairs are twisted together with non-woven wrapping under an extruded PUR sheath. The version with special TPE insulation gives low mutual capacitance, lower dielectric loss and low screen interference currents. Adapted to VDE 0250 / 0281 / 0282.

Key features

• Insulation selected by part number suffix: 1 - PVC 70°C, 9 - TPE
• Control pairs screened with laminated film and tinned-copper braid
• Extruded PUR outer sheath, grey (RAL 7001)
• Flame retardant to EN 60332-1-2
• Meets EMC requirements
• UV resistant to ASTM G 154
• REACH, RoHS and CE marked

Applications

• Connecting between frequency converter and motor for power circuits in machine cabling
• Dry, damp or wet interiors under normal mechanical stress
• Outdoor use within the permitted temperature range

Specifications

Standard: Adapted to VDE 0250 / 0281 / 0282 | Nominal Voltage (Uo/U): 600/1000 V (control cores 250 V) | Insulation Resistance: Min. 20 GΩ x cm | Test Voltage - Supply Cores: Core/core: 4000 V; Core/screen: 2000 V | Test Voltage - Control Cores: Core/core: 1500 V; Core/screen: 750 V | Temperature Range - Flexing: -5°C to +70°C | Temperature Range - Fixed Installation: -30°C to +70°C | Min. Bending Radius - Flexing: 12 x cable dia. | Min. Bending Radius - Fixed Installation: 4 x cable dia. | Conductor: Bare copper, fine wire, EN 60228 Cl. 6 | Core Insulation: Special PVC or TPE (control cores); part number suffix 1 = PVC 70°C, 9 = TPE | Control Pair Screen: Laminated film braided with a layer of tinned-copper wires | Core Assembly: Cores and pairs twisted together; non-woven wrapping | Outer Sheath: Extruded PUR, grey (RAL 7001) | Flame Retardancy: EN 60332-1-2 | UV Resistance: ASTM G 154

Standards: VDE 0250 / 0281 / 0282 | EN 60228 Cl. 6 | EN 60332-1-2 | ASTM G 154 | REACH | RoHS | CE