About this product
Key features
- Excellent adhesion on cement-based materials, brick, ceramics, glass, metals, wood, epoxy, polyester and acrylic resin
- Fast cure rate
- Good weathering and water resistance
- Non-corrosive
- Can be painted over with water, oil and rubber-based paints (preliminary tests recommended)
- Movement capability ±35 %
- Bonds well to defined substrates without surface pre-treatment
- Good mechanical and weathering resistance
- Very low emissions
- Adhesive-sealant with CE marking
- High modulus flexible sealant
- Indoor and outdoor use
- Non-sag consistency
- Movement capability 15%
Applications
- Elastic adhesive for cover plates, gaskets, acoustic ceiling tiles, floor moldings, door sills, roof tiles, wood or metal door frames
- Elastic joint sealer for air ducts, containers, tanks, silos, reservoirs, aluminium fabrication, bolted lap joints
- Bonding concrete, masonry, cast stone, ceramic, wood, metal, glass
- Sealing vertical and horizontal joints
Specifications
Colour: White | Shelf life: 12 months in unopened container | Storage: 4-35 °C (40-95 °F) | VOC content: 28.5 g/L | Shore A hardness: 40-45 | Tensile strength: 225 psi | Elongation at break: 600 % | Elastic recovery: >90 % | Lap shear strength: 165 psi | Service temperature: -40 °F to 170 °F | Tack-free time: 1 to 2 hours | Final cure: 3 to 5 days | Recommended joint depth: 1/4 in minimum to 1/2 in maximum; 2:1 width to depth | Chemical base: Moisture-cured polyurethane
Standards: ASTM C920 Type S, Grade NS, Class 12.5, Use NT, I, M, G, A, O | Federal Specification TT-S-00230C | LEED v4 EQc 2 | GEV-Emicode EC1PLUS | French VOC Class A+ | CE EN 15651-1 F EXT-INT CC 25HM | CE EN 15651-4 PW EXT-INT CC 25HM | ASTM C920 class 35 | ISEGA certificate 43792 U 16
