Key features

• Fast reacting, does not run on vertical surfaces
• Seamless
• Spray applied
• Fully bonded
• High tensile strength
• High tear resistance
• Remains elastomeric at low temperatures
• Root penetration resistant
• Solvent-free
• Potable water contact approved

Applications

• Water containment areas, potable and contaminated water
• Primary and secondary containment tanks
• Waste water treatment tanks
• Infrastructure protection
• Roof and podium deck waterproofing
• Planters and landscape areas
• Car deck systems

Specifications

Chemical base: Hybrid polyurea | Density: Part A 1.03 kg/L; Part B 1.10 kg/L (25°C) | Viscosity: Part A 1000 ± 150 cps; Part B 1250 ± 200 cps | Solid content by volume: ≈ 99 % | VOC: ≈ 22 g/L | Thickness: 1.5-2.0 mm | Shore A hardness: ≥ 85 | Tensile strength: ≥ 15 N/mm² | Elongation: > 500 % | Tensile adhesion strength: ≥ 2 MPa | Tear strength: ≥ 70 N/mm | Crack bridging: Static > 2.5 mm (A5); dynamic no crack after 20000 cycles | Water penetration: > 7 bar | Low temperature: No cracks up to -35°C | Mixing ratio: A:B = 1:1 by volume | Consumption: 1.60-2.15 kg/m² for 1.5-2.0 mm DFT | Product temperature: 65-70 °C | Tack free time: ≈ 60-120 secs | Gel time: ≈ 6-10 secs | Shelf life: 12 months

Standards: BS 6920 (potable water) | CFTRI potable water tested | ASTM D412 | EN 1062-7 Class A5 / B4.2 | IS 101-P2/Sec 3:2015 VOC

Packing: Part A 200 kg drum + Part B 220 kg drum