Key features

• Cold applied, self-adhesive
• Excellent adhesion to vertical and horizontal surfaces
• Excellent resistance to chlorides, sulphates, dilute alkalis and acids
• Good tear and puncture resistance

Applications

• Waterproofing/damp-proofing for concrete protection
• Tanking of below ground structures, subways and retaining walls

Specifications

Compound: SBS modified bitumen | Top layer: Cross laminated HDPE film | Bottom layer: Release liner PE film | Roll width: 1.0 m ± 0.01 m (EN 1848-1) | Roll length: 20.0 m ± 0.2 m | Areal weight: 1.5 mm: 1.6 kg/m2; 2.0 mm: 2.1 kg/m2 | Static puncture resistance: ≥ 280 N (ASTM E154) (1.5 mm) | Tensile strength: Membrane ≥ 4 N/mm2 (ASTM D412); HDPE film L/T ≥ 48/42 N/mm2 (ASTM D882) | Elongation: ≥ 300 % (ASTM D412) | Tear resistance: Membrane L/T ≥ 25/33 N/mm; HDPE film L/T ≥ 160/155 N/mm (ASTM D624) | Flexibility at low temperature: No cracks at -15 °C (ASTM D1970) | Softening point: > 102 °C (ASTM D36) | Water tightness: No leakage at 7 bar hydrostatic pressure | Water vapour transmission: < 0.3 g/m2/24 hours (ASTM E96) | Chemical resistance: Resistant to 10% NaCl, Ca(OH)2, H2SO3 (EN 1847:2009) | Net coverage per roll: approx 18.33 m2 per 20 m x 1 m roll | Application air/substrate temperature: +5 °C to +45 °C | Shelf life: 12 months | Storage temperature: +5 °C to +30 °C

Standards: IS 16471 : 2017 (bonded sheet membrane)