Key features

• No-torch, flame-free application
• Fully bonded system
• Watertight against lateral water migration
• Can be applied on wet concrete
• Fast and easy installation
• Minimal surface preparation
• High impact resistance

Applications

• Basements and below ground structures
• Vertical reinforced concrete walls
• Single and strip foundations
• Single layer under heavy protection
• Base sheet in multi-layer systems

Specifications

Chemical base: Polymer modified bitumen | Reinforcement: Cross-laminated polyethylene (PE) | Roll width: 1.0 m (EN 1848-1) | Roll length: 20.0 m | Effective thickness: 1.5 mm +/- 0.15 mm (EN 1849-1) | Resistance to static puncture: 240 N +/-10% (ASTM E154) | Tensile strength: 3 N/mm2 +/-10% (ASTM D412) | Elongation: 300 % +/-10 % (ASTM D412) | Resistance to tear (nail shank): 30 N +/-10 % (ASTM D624) | Joint peel resistance: 400 N/m +/-10 % at 23 C (ASTM D1876) | Foldability at low temperature: Unaffected at -25 C (ASTM D1970) | Water vapour permeability: 0.008 g/m2/24hr/mm-Hg +/-10% (ASTM E96) | Resistance to lateral water migration: 70 m +/- 7 m (ASTM D5385) | Application temperature (air/substrate): +5 C min / +50 C max | Relative air humidity: 80 % max | Shelf life: 12 months from date of production | Storage: Dry, +5 C to +35 C, store vertically