Key features

• Can be applied on wet concrete
• No-torch application
• Fully bonded system
• Watertight against lateral water migration
• Fast and easy installation
• High impact resistance

Applications

• Basements and below-ground structures
• Podiums, terraces
• Vertical reinforced concrete retaining walls
• Single and strip foundations

Specifications

Chemical base: Polymer modified bitumen | Construction: Top HDPE film, bottom siliconised release liner, reinforced intermediate layer | Roll width: 1.0 ± 0.05 m (EN 1848-1) | Roll length: 20.0 or 10.0 ± 0.05 m | Colour: Top yellow; bottom greyish white | Effective thickness: 1.5 ± 0.15 mm (EN 1849-1) | Impact resistance: Pass (EN 12691) | Static puncture resistance: ≥ 300 N (ASTM E154) | Tensile strength L/T: ≥ 6 / ≥ 4 N/mm² (ASTM D412) | Elongation: ≥ 350 % free HDPE film (ASTM D882) | Peel adhesion: ≥ 1.2 kN/m with SikaShield W1 IN on concrete (ASTM D903) | Tear strength: ≥ 18 N/mm (ASTM D624-2000) | Nail tear resistance: 250 N (± 50 N) (EN 12310-1) | Joint peel resistance: > 1.2 kN/m (ASTM D1876-2008) | Foldability at -25 °C: Pass (EN 1109) | Water penetration: No leakage at 7 bar (ASTM D5385-2020) | Water absorption: < 1 % (ASTM D5147-2018) | Application air/substrate temperature: +10 °C to +40 °C | Shelf life: 12 months | Storage temperature: +5 °C to +35 °C