Key features

• Application by brush, spray or flat trowel
• No additional water required
• Pre-batched components
• Reduces saltpetre action and prevents carbonation
• Protects concrete from chloride penetration
• Approved for potable water contact
• Flexible enough to bridge hairline cracks
• Bonds to damp substrates

Applications

• Potable concrete water tanks, reservoirs, waste water tanks
• Terraces, balconies, sunshades
• Flat and small roofs
• Basement and retaining walls
• Swimming pools, fountains, canals
• RCC gutters, drains, planter boxes
• Wet areas (toilets, kitchen, utility, sunk slabs)
• Lift pits, sumps

Specifications

Chemical base: Part A acrylic polymer; Part B Portland cement with aggregates and additives | Shore A hardness: ~90 (ASTM D2240) | Tensile strength: >= 2.0 N/mm2 (ASTM D412) | Elongation at break: ~10 % (ASTM D412) | Tensile adhesion strength: >= 2.0 N/mm2 (ASTM D4541) | Water penetration under pressure: ~0 mm at 5 bar for 72 h (BS EN 12390-8) | Mixing ratio: Part A : Part B = 1 : 4 by weight | Fresh mortar density: ~2.0 kg/L (+27 C) | Consumption: Base coat ~1.5 kg/m2 + top coat ~1.5 kg/m2 | Layer thickness: ~1.2-1.5 mm in 2 coats | Application temperature (air/substrate): +10 C min / +40 C max | Pot life: ~40 minutes (100 g, +27 C) | Foot traffic: ~1 d | Water immersion: ~7 d | Shelf life: 12 months from date of production

Standards: SGS Certificate - free from acute lethal toxicity as per IS 6582 | CFTRI Certificate for repeated use with aqueous foods/water per USFDA 175.300

Packing: 25 kg set (A 5 kg + B 20 kg)