Key features

• Application by brush, spray or flat trowel
• No additional water required
• Pre-batched components
• Flexible, bridges hairline cracks
• Reduces saltpetre action and prevents carbonation
• Protects concrete from chloride penetration
• Fast curing

Applications

• Potable water holding tanks, reservoirs, overhead tanks (CFTRI certified)
• Raw water and waste water tanks
• Terraces, balconies, sunshades
• Flat and small roofs
• Basement and retaining walls
• Swimming pools, fountains, canals
• RCC gutters, drains, planter boxes
• Wet areas
• Lift pits, sumps

Specifications

Chemical base: Part A acrylic polymer; Part B Portland cement with aggregates and additives | Shore A hardness: ~90 (ASTM D2240) | Tensile strength: ~1.3 N/mm2 (ASTM D412) | Elongation at break: ~110 % (ASTM D412) | Tensile adhesion strength: ~1 N/mm2 (ASTM D7234) | Water penetration under pressure: ~0 mm at 5 bar for 72 h (BS EN 12390-8) | Mixing ratio: Part A : Part B = 1 : 2.5 by weight | Fresh mortar density: ~1.90 kg/L (+27 C) | Consumption: ~1.5-2.0 kg/m2 in 2 coats | Application temperature (air/substrate): +10 C min / +40 C max | Pot life: ~45 minutes (100 g, +27 C) | Foot traffic: ~1 d | Water immersion: ~7 d | Shelf life: 12 months from date of production

Standards: CFTRI Mysore certified safe for contact with drinking water | Tested per USFDA Method 175:300 for drinking water contact (single and repeated use)

Packing: 7 kg set and 35 kg set