Key features

• Pre-batched components, no additional water
• Easy and fast mixing
• Easy to apply by brush or flat trowel
• Bonds well to damp substrates
• Reduces saltpetre action
• Protects concrete from chloride penetration and carbonation
• Good abrasion resistance
• Non-corrosive to steel
• Bridges minor hairline cracks
• Requires protective overlay for long-term durability

Applications

• Wet areas: toilets, kitchen sunk, utility areas, sunk slabs
• Terraces, balconies, sunshades
• Lift pits, sumps
• Podium decks, planters
• Flat and small roofs
• Swimming pools, fountains
• RCC gutters, drains
• Basement and retaining walls
• Potable water RCC tanks

Specifications

Chemical base: Part A acrylic polymer; Part B Portland cement with selected aggregates and additives | Colour: Mixed grey slurry; Part A milky white liquid; Part B grey powder | Mixing ratio: Part A : Part B = 1 : 2 by weight | Density: ~1.6 kg/l mixed mortar at 27 °C, 50% RH | Consumption: approx 1.5 to 2.0 kg/m2 in 2 coats | Shore A hardness: ≥ 90 (14 days) (ASTM D2240) | Tensile strength: ≥ 1 MPa (14 days) (ASTM D412) | Elongation: ≥ 120 % (14 days) (ASTM D412) | Tensile adhesion strength: ≥ 1 MPa pullout (ASTM D4541) | Water penetration under pressure: ≈ nil at 5 bar for 72 h (BS EN 12390-8) | Open time: ≈ 45-60 minutes at 27 °C | Overcoating interval: min 6-8 hrs between coats | Moist curing: min 3-5 days | Foot traffic: after 24 hrs | Application air/substrate temperature: +10 °C to +40 °C | Shelf life: 12 months | Storage temperature: +10 °C to +35 °C (protect liquid from frost)