Key features

• Very flexible, good elongation, crack bridging
• Application by brush, spray or flat trowel
• No additional water required
• Pre-batched components
• Reduces saltpetre action and prevents carbonation
• Protects concrete from chloride penetration
• Fast curing

Applications

• Drinking water tanks (UG and OH reservoirs)
• Raw water and waste water tanks
• Terraces, balconies, sunshades
• Flat and small roofs
• Basement and retaining walls
• Swimming pools, fountains, canals
• RCC gutters, drains, planter boxes
• Wet areas
• Lift pits, sumps

Specifications

Chemical base: Part A acrylic polymer; Part B Portland cement with aggregates and additives | Tensile strength: > 1.5 N/mm2 (ASTM D412) | Elongation at break: ~180 % (ASTM D412) | Tensile adhesion strength: ~1.2 N/mm2 dry concrete (ASTM D7234-2019) | Crack bridging ability: >= 2 mm static (EN 1062-7) | Artificial weathering: No chalking or cracking, 500 hours (IS 101) | Water vapour transmission: < 1 g/m2-hr (ASTM E-96) | Water penetration under pressure: ~0 mm at 5 bar for 72 h (BS EN 12390-8) | Mixing ratio: Part A : Part B = 1 : 1.5 by weight | Fresh mortar density: ~1.65 kg/L (+27 C) | Consumption: ~2.0-2.2 kg/m2 total in 2 coats | Application temperature (air/substrate): +10 C min / +40 C max | Pot life: ~40 minutes (100 g, +27 C) | Shelf life: 12 months from date of production

Standards: CFTRI Mysore certified safe for contact with drinking water | Tested per USFDA Method 175:300 for drinking water contact (single and repeated use)

Packing: 50 kg set and 12.5 kg set