weberfix PU is a PU thinset adhesive for large tiles and stones on any substrate. It is suitable for tile and stone cladding on high rise buildings, has very high bond strength and chemical resistance, suits heated sub-floors and areas subject to thermal shock and freezing, and does not damage wooden substrates or water sensitive stone like green marble. Bed thickness is 2-6 mm, up to 10 mm in limited extent. Supplied as a 10 kg bucket (Part A : Part B 9:1 by weight).

Key features

• Suitable for tile and stone cladding on high rise buildings
• No spacer required if adequate construction joints are provided in tile and stone cladding
• Very high bond strength and chemical resistance
• Suitable for heated sub-floors and areas subjected to thermal shock and freezing
• Ideal for tiles and stones prone to deformation due to water absorption and thermal expansion
• Suitable to install all tiles and stones including glass (not for PU coated glass) and metal tiles
• No shrinkage
• No sag formula: allows hassle free application on vertical walls, without any slippage
• Moisture free system: does not damage wooden substrates or tiles, or water sensitive stone like green marble
• Useful for bed thickness of 2-6 mm, may go up to 10 mm in limited extent

Applications

• Tile and stone cladding on high rise buildings
• Metal, plywood, drywall, AAC wall panels, PU waterproofed surface, tile-on-tile & tile-on-stone, lime mortar surface and cementitious plasters

Specifications

Adhesive Type: Polyurethane (PU) thinset, two-part | Mixing Ratio: Part A : Part B - 9:1 by weight | Bed Thickness: 2-6 mm (up to 10 mm in limited extent) | Recommended Substrates: All surfaces like metal, plywood, drywall, AAC wall panels, PU waterproofed surface, tile-on-tile & tile-on-stone, lime mortar surface and cementitious plasters | Coverage: Approx. 4.6 kg/sq m per 3 mm of thickness | Pack Size: 10 kg bucket

Standards: ISO 13007 | EN 12004

Packing: 10 kg bucket (Part A : Part B - 9:1 by weight)